(e). Press "
" key and move to the two flicking digits of month.
(f). Press or key to set month (real time).
(g). Press "
" key and move to the two flicking digits of day.
(h). Press or key to set day (real time).
(i). Press "
" key and move to the two flicking digits of hour.
(j). Press or key to set hour (real time).
(k). Press "
" key and move to the two flicking digits of
minutes.
(l). Press or key to set minutes (real time).
(m). Press "
" key and move to the two flicking digits of second.
(n). Press or key to set seconds (real time).
(o). Press "
" key to store real time values.
(r). Press “
SET
” key to exit this mode.
2. Interval
–
Time setting :
The logging interval time determines how often the meter stores
logged readings in memory.
(a). Press " " key to turn on the meter.
(b). Press “
SET
” key to enter the setting mode, then press or
key until the display shows “Set Intr”.
(c). Press "
" key to enter the interval time setting mode and the
three flicking numbers of second.
(d). Press or key to set the desired second of interval time
(1 to 255 seconds).
(e). Press "
" key to store the auto datalogging interval time.
(f). Press “
SET
” key to exit this mode.
3. Offset setting :
You can adjust the meter readings to compensate for the errors
of a specific thermocouple. The allowable adjustment range is
from +12.7 to -12.8 degree, regardless of the temperature units.
You can store individual offsets for T1, T2, T3 and T4.
(a). Press " " key to turn on the meter.
(b). Press “
SET
” key to enter the setting mode, then press or
key until the display shows “
SEt OFSEt
”.
~ 8 ~
