2
SAFETY AND GENERAL INFORMATION
Save these instructions.
For your safety, read, understand, and follow the information provided with and on this
device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics
and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use
and repair of this product may require special skills and knowledge. Instructions and safety information shall be read
to and discussed with the operator in the operator's native language, making sure that the operator comprehends
their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this
device, remove from service immediately.
Inspect before each use.
Do not use if abnormal conditions such as cracked welds, damaged, loose or missing
parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall
be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an
abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact
distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be
made by an authorized repair facility. Labels and Operator's Manuals are available from the manufacturer.
PRODUCT DESCRIPTION
Omega Lift Heavy Duty Bottle Jacks are designed for lifting, but not sustaining, up to rated capacity loads.
They are to be used vertically. After lifting, loads must be immediately supported by appropriate means such as
jack stands. These models are suitable for use in an appropriately rated and designed vertical or bench press
structure. These jacks are not recommended for use in lifting or positioning construction trailers, houses and/or
other building structures. These jacks comply with applicable ASME / ANSI Standards.
SPECIFICATIONS
Model
Capacity
Base Size
(L x W)
Min.
Height
Max. Height
10300
30 Ton
8 1/8" X 6 7/8"
11"
18"
10500
50 Ton
10 7/8" X 7 5/8"
9-1/2"
13-7/8"
saddle
handle sleeve
handle
oil filler screw
carry
handle
release valve
saddle
handle sleeve
low pressure high
volume pump
high pressure
low volume
pump
handle
release valve
oil filler
screw
Figure 1 - 10300 Nomenclature
Figure 2 - 10500 Nomenclature
