Page
Page
-16
C h a n g i n g F e a t u r e F u n c t i o n s
Changing Feature Functions Through Learning Code Program:
This security system has 7 features that can be turned "on" or "off" through the features programming
mode. To turn "on" or "off" selected features in the programming mode, follow these steps:
Step #1: Turn the ignition switch "on", then "off" the ignition switch.
Step #2: Within 5 seconds of turning "off" the ignition switch, press the valet button 5 times.
Step #3: You have just entered into the feature programming mode. To confirm, the siren will respond
with one short and one long siren chirp. For the next 10 seconds the system is ready for you
to select what feature code you want to enter and turn "on" or "off". Note: This programming
mode will deactivate if a feature programming selection is not made within 10 seconds.
Step #4: Within 10 seconds of entering the feature programming mode, press the Easy Valet
TM
button
switch the number of times that equal the feature number you want. After pressing the button
switch multiple times the siren will chirp the same number of times to confirm what feature
number you are now in for programming.
Example: Press valet button switch 8 times and the siren will chirp 8 times.
Step #5: Turning feature #8 in the example above "on" or "off":
Turning "on" feature #8: Press the large transmitter button. The siren will chirp once to
confirm that the feature is turned on.
Turning "off" feature #8: Press the small transmitter button. The siren will chirp twice to
confirm the feature turned "off".
Note: If you keep turning feature #8 in the example on and off, the programming activity is
extended. Remember, 10 seconds without any program activity will result in the system
exiting this programming mode automatically.
Step #6 Repeat steps 4 & 5 to enter into another feature number to program the "on" or "off" condition.
Step #7 Turning on the ignition, or 10 seconds of no program activity, will automatically turn off this
feature programming mode. Exiting the program is confirmed by one long warbling chirp.
-17
Ignition Turned On/Off Activates Door Locks
(Selected From Learning Code Feature #1): Alarm comes with this feature turned "On".
With Feature #1 In The "ON" Position:
A. The vehicle's doors are programmed to lock 1 second after the ignition is turned "on".
B. The vehicle's doors are programmed to unlock instantly when the ignition is turned "off".
By Following steps 1, 2, and 3 on page 17, you will be in the feature programming mode. To turn "on"
or "off" feature #1, follow the steps below:
Step #4: Press the Easy Valet
TM
button switch 1 time and the siren will chirp 1 time to confirm that
you are in feature #1 program. You now have 10 seconds to start step #5.
Step #5: Within the next 10 seconds, turn feature #1 "on" or "off":
Turning "on" feature #1: Press the large transmitter button. The siren will chirp once to
confirm feature #1 was turned on.
Turning "off" feature #1: Press the small transmitter button. The siren will chirp twice to
confirm feature #1 turned "off"
Note: If you keep turning feature #1 on and off, programming activity will be extended.
10 seconds without any programming activity, the system will exit the programming mode
Step #6: To turn "on" or "off" another feature number, repeat steps #4 and #5 within 10 seconds.
Step #7: To exit this program at anytime, Turn on ignition, or have 10 seconds of no program activity.
Exiting this program is confirmed by one long warbling chirp.
Open Door By-Pass Added To Feature #1 Above: (Selected From Learning Code Feature #2):
With Feature #2 In The "ON" Position: The alarm comes with this feature turned on.
After the ignition is turned "On" or "Off", feature #2 is programmed to check the vehicle's door
circuit first. If feature #2 detects that any vehicle doors are open when the ignition is turned "on"
or "off", the doors will not lock or unlock from the ignition turning on or off. This prevents
accidentally locking yourself out of the vehicle and to prevent children from exiting the vehicle.
To program follow step #4 above, but press the valet button switch 2 times and then follow step #5.
