5
Caution
Installation
1. Avoid installing the unit in places where:
• the ambient temperature may reach beyond the range of -10 to 50°C
(14 to 122°F) while in operation
• the humidity may reach higher than 90% RH while in operation
• a change in the ambient temperature is so rapid as to cause
condensation
• corrosive gases (sulfide and ammonia gas, in particular) or
combustible gases are emitted
• the unit is subject to vibration or shock
• the unit is likely to come in contact with water, oil, chemicals, steam,
or vapor
• the unit is exposed to dust, salt, or air containing iron particles
• the unit is subject to interference with static electricity, magnetism,
or noise
• the unit is exposed to direct sunlight
• heat may be accumulated due to radiation
Maintenance
1. Do not use organic solvents such as alcohol or benzene to wipe this
unit. Use a neutral detergent.
