Page 24
The Crime Guard 850i
3
is a sophisticated, yet flexible security and
convenience system. Many of its operations may be configured as the user
desires- “Programming Mode” allows you to configure 30 operational
features to suit your wants and needs. Your vehicle ignition key and the
Valet Switch are used to enter the Programming Mode, as described by the
three steps listed below. Once in Programming Mode, the Valet Switch is
used to access the desired feature, and the transmitter is then used to change
the chosen feature’s status. During the process, the siren and the Status
Indicator Light indicate certain conditions of Programming Mode and the
chosen feature’s status.
Once the system is in Programming Mode, the Valet Switch is then
pressed and released the number of times equal to the feature number which
is to be accessed for programming. After pressing the Valet Switch as many
times as the feature number, the siren will chirp the same number of times
and the Status Indicator Light will flash the same number, between pauses.
Once the feature has been selected its status, or setting, can be chosen by
pressing the appropriate button on the transmitter. Basically, pressing the
transmitter’s “Arm/Lock” button turns the feature on, or pressing the
transmitter’s “Disarm/Unlock” button turns the feature off. Features which
are not “on or off” features, such as the activated alarm duration of 30 or 60
seconds, are noted otherwise.
To Enter Programing Mode:
Step 1:
Turn the vehicles’s ignition on.
Step 2:
Turn the ignition off.
Step 3:
Within 5 seconds, Press & Release the Valet Switch 5 times.
-The siren will chirp then sound briefly and the Status Light will
flash to confirm that the system is entering Programing Mode.
-Once in Programming Mode, if 10 seconds of no programming
activity occurs, the system will exit Programming Mode. Pro-
gramming activity is the pressing of the Valet Switch or press-
ing a transmitter button once a feature is accessed.
To Access a Feature:
Step 4:
Within 10 seconds, Press & Release the Valet Switch the same
number of times as the desired feature’s number.
-The siren will chirp and the Status Indicator Light will flash as
many times as the Valet Switch was pressed to indicate the
feature number which is now accessed.
PROGRAMMING THE 850i
3
