Page 27
Feature #3
30 or 60 Second Alarm Duration
(Factory Default Setting 60 Seconds)
This feature allows the option of a 30 or 60 second Alarm Duration,
which is when the system has activated in Armed state, sounding the siren
and flashing the parking lights.
Changing the Alarm Duration:
Follow Steps 1 to 4 on page 24; at Step 4 the Valet Switch will be pressed
and released three times. The system’s response will be three siren chirps,
and the Status Light flashing three times, pausing, then repeating. Within 10
seconds, press and release the transmitter’s "Arm/Lock" button to set the
Alarm Duration for 60 seconds (the siren will chirp once) or the "Disarm/
Unlock" button to set the Alarm Duration for 30 seconds (the siren will chirp
twice).
Feature #5
Last Door Arming
(Factory Default Setting Off)
This feature configures the system to automatically Arm itself 30 seconds
after the vehicle’s last door is closed.
Programming Last Door Arming:
Follow Steps 1 to 4 on page 24; at Step 4 the Valet Switch will be pressed
and released five times. The system’s response will be five siren chirps, and
the Status Light flashing five times, pausing, then repeating. Within 10
Feature #4
3 / 45 Second Arming Delay
(Factory Default Setting 3 Second)
This feature determines how long after the Arming confirmation chirp
that the system becomes fully Armed. The Arming Delay applies to the
system Arming regardless if it occurs from using the transmitter, Last Door
Arming or Automatic Rearming.
Programming 3 / 45 Second Arming Delay:
Follow Steps 1 to 4 on page 24; at Step 4 the Valet Switch will be pressed
and released four times. The system’s response will be four siren chirps, and
the Status Light flashing four times, pausing, then repeating. Within 10
seconds, press and release the transmitter’s "Arm/Lock" button to configure
the system with a 45 second Arming Delay (the siren will chirp once) or the
"Disarm/Unlock" button to configure the system with a 3 second Arming
Delay (the siren will chirp twice).
