2.5.2 Removing the Pens
1. Check to see that the pens are offset as shown in Figure 2-9. Otherwise, you
can damage the arm and drive mechanism if you try to remove them.
CAUTION
DO NOT ATTEMPT TO OFFSET THE PENS MANUALLY (BY
HAND). THE DRIVE MECHANISM COULD BE DAMAGED.
DO NOT ATTEMPT TO CHANGE THE PENS WHILE THEY ARE
IN MOTION.
2. Perform Step 2b in Section 2.5.1 to offset the pens.
3. With a screwdriver in one hand, push on the rectangular area of the pen
shown in Figure 2-12. Using the other hand, release the pen from the spring
clip attached to the pen holder.
M4098-F2-13
Figure 2-12. Pen Removal
4. At the same time, slide the pen out from the pen holder.
5. Install new pens following section 2.5.1, steps 3 thru 6.
Setting Up the Recorder
2
2-9
!
Summary of Contents for CTXL-PT-W8
Page 64: ...6 2 List of Accessories and Charts Papers 6 Notes...
Page 79: ...NOTES 8 13...
Page 80: ...NOTES 8 14...