DP6060 Dual-Input Process Meter
Instruction Manual
97
Display Parameter Action/Setting
Description
locd
Locked
Enter password to unlock meter
Lt-CLr
Latching-
cleared
Set relay for latching operation with manual
reset only after alarm condition has cleared
mA
4-20 mA
Set meter for 4-20 mA input
mAn
Manual
Press Enter to manually control relays or
analog output operation
math
Math
Select channel C math function
mAx
Maximum
Program maximum mA output allowed
mbus
Modbus
Select to display Modbus input or to assign
Modbus input as the analog output source
menu
Menu button
Assign digital input to Menu button
min
Minimum
Program minimum mA output allowed
nmulti
Multiplication
Channel C = ((A*B)+P)*F
No PtS
Num of points
Set meter for 2 to 32-point linearization
O Hold
Relays output
hold
Assign digital input or function keys to hold
all relay states
OFF
Off
Disable relay and front panel status LED,
turn relays off, program off time delay
OFF 1
Off 1
Set relay 1 Off time delay (1-8)
on
On
Enable fail-safe operation, turn relays on,
program on time delay
O-rang
Overrange
Program mA output for display overrange
Out 1
Output 1
Program output 1 value (e.g. 4.000 mA)
Out 2
Output 2
Program output 2 value (e.g. 20.000 mA)
pass
Password
Enter the
Password
menu
Pass 1
Password 1
Set or enter Password 1 (Allows use of the
F1–F3 function keys)
Pass 2
Password 2
Set or enter Password 2 (Allows use of the
F1–F3 function keys and changing the
set/reset points)
Pass 3
Password 3
Set or enter Password 3 (Restricts all
programming & F1–F3 keys)
prog
Program
Enter the
Program
menu
Prog E
Programmable
exponent
Set meter for programmable exponent and
enter exponent value
ratio
Ratio
Channel C = (A/B)*F
RELaY
Relay
Enter the
Relay
menu
reset
Reset
Press Enter to access the
Reset
menu
rht
Round
horizontal tank
Set meter for round horizontal tank volume
calculation
Right
Right arrow
Assign digital input to Right arrow button/F1
RLY 1
Relay 1
Relay 1 setup (1-8)
Rly d
Disable relay
Assign digital input and function keys to
disable all relays
Rly E
Enable relay
Assign digital input to enable all relays