Page - 17
5) Flash-2x & Pause = The security system was triggered from the hood and trunk
circuit, or the current sensing circuit.
6) Flash-3x & Pause
= The security system was triggered from the door circuit.
7) Flash-4x & Pause
= The security system was triggered from the Auxiliary Sensor Port
circuit.
Automatic Transmitter Verification
TM
: After the ignition is turned "on", the LED
Status Light will flash and pause to indicate the number of transmitters programmed to
operate your security system. For example: two flashes and pause indicates that only two
transmitters are encoded to operate your system. Whenever you leave your vehicle and keys
with someone, you will now have the peace of mind in knowing that only your transmitters
will operate the security system and that no additional transmitters have been coded into
your system for the purpose of stealing your vehicle or its contents. This flashing indication
occurs for 10 seconds every time the ignition switch is turned "on".
8) Flash-1x & Pause = 1 transmitter code is stored in the system's memory.
9) Flash-2x & Pause = 2 transmitter codes are stored in the system's memory.
10) Flash-3x & Pause = 3 transmitter codes are stored in the system's memory.
11) Flash-4x & Pause = 4 transmitter codes are stored in the system's memory.
Unauthorized Transmitter Alert: In addition to Automatic Transmitter Verification
showing how many transmitters can operate your system each time the ignition is turned
“on”, your Excalibur security system will also warn you if any transmitter encoding activity
