Page - 25
Programmable Features
The Excalibur vehicle security system has 25 programmable features which allows you
to customize your system to fit your personal preferences and needs. This section describes
each of features in more detail, and the following section explains the programming
procedure. Please note that an itemized list of the programmable features is found in
the centerfold of this booklet as an easy-to-use features programming checklist.
#1 Selectable Code Override: Default 1 & 0. The valet switch is an important part of
your Excalibur system; it allows an emergency override to disarm the system in place of
the remote transmitter, and it is crucial to the programming of transmitters and features.
Your Excalibur system's advanced design includes this programmable feature, which al-
lows you to configure the valet switch operation for the most convenient ease of use, or for
personally-customized maximum security.
The Selectable Code Override must be entered to achieve an override disarming of the
system. For a more secure access to an override disarm, the vehicle owner may select two
separate stages of valet switch presses, and the number of valet switch presses, from 1 to 9
presses, for each of these stages, which are needed to achieve the successful entry of the
Selectable Code Override. The customized number of valet switch presses are chosen by
yourself, the vehicle owner, and programmed into the system.
As an illustration of this feature, with the default setting of "one and no presses",
to disarm the system without the transmitter, after entering the vehicle, the ignition switch
is turned "on", and the valet switch is pressed once, at which time the system will instantly
