Omega Executive 3000 User Manual Download

Page: 8 / 12

3.2

Indicadores LED en estados de Alarma

Cuando el LED de alarma este encendido, observe la barra de LEDs (de izquierda a derecha), y contacte a su agente
de servicio técnico.

LED 1,2 encendidos Sobre voltaje en el inversor

LED 1,3 encendidos Bajo voltaje en el inversor

LED

1,4

encendidos

Recalentamiento

LED 1,5 encendidos Sobre voltaje en el cargador

LED 1,2,4 encendidos Corto circuito a la salida

LED 1,2,5 encendidos Sobre voltaje en el BUS

LED 1,3,5 encendidos Mal funcionamiento del PFC o del cargador

LED 1,4,5 encendidos Sobre carga durante operación en el modo batería

Especificaciones Técnicas

Modelo OMEGA

1000

OMEGA 2000

OMEGA 3000

Capacidad

1000VA/700W

2000 VA / 1400 W

3000VA/2100W

Operación

UPS On Line de alta frecuencia

Voltaje 160-270VAC
Corriente

6A max

12A max

16A max

Frecuencia 50(60)Hz+/-5%
Factor de poder

>0.95 (a máxima carga)

Entrada

Fase

Mono Fásico / H+N+GND

Voltaje 220/230//-2%
Frecuencia 50(60)Hz+/-0.5%
Forma de onda

Verdadera onda senosoidal

Stable

110-140% por 20 segundos

Sobrecarga

Peak current

>140% por 10 ciclos

Modo Principal

Modo Batería : 0mS

Salida

Tiempo de transferencia

Modo Inversor

Modo Bypass : <4mS

Voltaje DC

48VDC

72 VDC

120VDC

Cantidad

12VDC/7AH×4pcs 12VDC/7AH×6pcs 12VDC/7AH×10pcs

Corriente de carga

Tiempo de respaldo

10~15 Minutos (Depende del tamaño de la carga)

Batería

Tiempo de recarga

8~10 Horas (Recupera hasta el 90% de la capacidad)

Descarga de la Batería

Suena cada 4 segundos

Descarga por más de 30 min

Suena cada 15 segundos

Batería baja

Suena cada segunda

Sobrecarga Suena

muy

rápido

Alarmas

Falla Suena

continuamente

Ruido Acústico

<45dBA(1 metros)

<50dBA(1 metros)

Temperatura 0-40°C

0-40°C

Humedad relativa

<95%(sin condensar)

Ambiente

Altitud <3000

metros

Dimensiones

(D)467mm

(W)190mm

(H)255mm

(D)532mm

(W)190mm

(H)255mm

(D)470mm

(W)225mm

(H)480mm

Peso Neto

22Kgs

29Kgs

49Kgs

IMPORTANT SAFETY INSTRUCTIONS

UL Safety instructions

SAVE THESE INSTRUCTIONS - This manual contains important instructions for model 1KVA/2KVA that should

be followed during installation and maintenance of the UPS and batteries.

When replacing batteries, use the same number and type of batteries.

Controlled Environment-Intended for installation in a controlled environment. Refer to manual for environmental

conditions.

CAUTION - Do not dispose of battery or batteries in fire. The battery may explode.

CAUTION - Do not open or mutilate the battery or batteries. Released electrolyte is harmful to the skin and eyes.

CAUTION - A battery can present risk of electric shock and high short circuit current. The following precautions

should be observed when working on batteries.
(1)  Remove watches, rings, or other metal object.
(2)  Use tools with insulated handles.
(3)  Wear rubber gloves and boots.
(4)  Do not lay tools or metal parts on the top of batteries.
(5)  Disconnect charging source prior to connecting or disconnecting battery terminals.

CAUTION - Servicing of Battery Bank Connection should be performed by service personnel knowledgeable of

batteries and the required precautions. Keep unauthorized personnel away from batteries.

No User Serviceable Parts -"CAUTION- Risk of electric shock. Do not remove cover. No user serviceable parts

inside. Refer servicing to qualified service personnel."

UPS Having Internal Battery -"CAUTION- Risk of electric shock-hazardous live parts inside this UPS are

energized from the battery supply even when the input ac power is disconnected."

Non-isolated Battery Supply -"CAUTION- Risk of electric shock. Battery circuit is not isolated from AC input,

hazardous voltage may exist between terminals and ground. Test before touching."

Battery Supplies Over 60V - "DANGER- Risk of electric shock, Do not touch un insulated battery terminals. "

FCC statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference. And (2) this device must accept any interference received including
interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation into an on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

Getting Started

This chapter gives an overview of the features and first-time operating instructions of the Uninterruptible Power
System(UPS).

1.1 Overview

The purpose of this UPS is to supply power to computers and other electronic equipment after a power failure.

In addition, this UPS protects the equipment from ac power line irregularities such as blackouts, sags, spikes, and
electromagnetic and radio frequency interference. It allows continuous operation through most commercial ac power
disturbances and an opportunity to secure data and safely shut down systems in the event of an extended outage.

This UPS using the most advanced PWM technology, Long back up time model is available, it includes 10A charger
can rapidly charge the external battery bank.