16 |
M 5 7 9 0
6 Registering your Gateway to OEG (Enterprise Mode)
A Layer N Gateway can be added to Omega Enterprise Gateway (OEG) in a non-internet environment by enabling
Enterprise Mode
on the Gateway unit. To add a Layer N Gateway to OEG, the
Cloud Registration
option needs to be
disabled by accessing the
System Settings
in the Gateway web UI. Once disabled, the gateway will be in
Enterprise
Mode
.
Important:
If the OEG License being used has not been activated, an internet connection will be needed for a one-
time license activation before proceeding. Adding a Layer N Gateway as a Device to OEG is only available
on non-trial licenses of OEG.
Step 1:
Navigate to the
Security Settings
in the Gateway UI.
Step 2:
Click the Turn Off Cloud Registration checkbox to disable the feature and set the GW-001 to
Enterprise
Mode
.
Figure 18: Gateway UI Security Settings – Turn off Cloud Registration
Step 3:
Click the
Update
button to save the setting change. The gateway LED will flash orange 3 times indicating the
device is in Enterprise Mode.
Note:
The GW-001 may be configured to use a Static IP rather than the default DHCP. If these settings are changed,
the PC or local-area network router must be on the same local-area network as the Static IP address assigned
to the GW-001 unit.
If the GW-001 will be moved and connected to a local-area network, it should be moved now and connected directly
to a DHCP-enabled, local-area network router or local-area network PC.
Step 4:
Launch and log in to your Omega Enterprise Gateway account.
