Input Type (RTD)
ENTER INPUT TYPE MENU:
Press
a
1)
Press
a
, if necessary, until
CNFG
prompt appears.
Press
d
2)
Display advances to
INPT
Input Menu.
Press
d
3)
Display flashes
T.ç
,
RTD
or
PROC
(Thermocouple, RTD or
Process). If the displayed input type is
RTD
, press
a
to skip to
step 6 (
RTD
stops flashing).
RTD SUBMENU:
Press
b
4)
Scroll through the available selection to
RTD
(flashing).
Press
d
5)
Display shows
STRD
stored message momentarily and then
RTD
(not flashing).
Press
d
6)
Display flashes previous RTD type selection i.e.
392.2
(see below for RTD types selection).
Press
b
7)
Scroll through the available RTD types to the selection of
your choice.
Press
d
8)
Display shows
STRD
stored message momentarily and then
advances to
RTD
RTD value.
RTD Types:
392 385
Display:
392.2
,
392.3
,
392.4
,
385.2
,
385.3
,
385.4
Last digit indicates: 2-, 3- or 4-wire input.
RTD VALUE SUBMENU:
Press
d
9)
Display flashes previous RTD value selection i.e.
100_
(see below for RTD value selection).
Press
b
10)
Scroll through the available RTD values to the selection of
your choice.
Press
d
11)
Display shows
STRD
stored message momentarily and then
advances to
RDG
Reading Configuration Menu.
RTD Values:
100 ohm
500 ohm
1000 ohm
Display:
100_
500_
1000
18
