29
3.2.9 Alarm 2 Menu
Figure 3.9 Flow Chart for Alarm 2 Menu
ENTER ALARM 2 MENU:
Press
a
1)
Press
a
, if necessary, until
CNFG
prompt appears.
Press
d
2)
Display advances to
INPT
Input Menu.
Press
a
3)
Press
a
, if necessary, until display advances to
ALR2
Alarm 2 Menu.
Press
d
4)
Display advances to to
AçTV
Active Submenu.
ACTIVE SUBMENU:
Press
d
5)
Display flashes previous selection. Press
b
to
ABoV
Above,
or
BELo
Below.
Press
d
6)
Display shows
STRD
stored message momentarily and then
advances to
DEAD
Deadband.
DEADBAND SUBMENU:
Press
d
7)
Display shows
020.0
Deadband value that can be changed
by pressing
b
or
c
.
Press
d
8)
Display shows
STRD
stored message momentarily and then
advances to
ID
ID Code Menu.
The Dead Band or neutral zone is the number of degrees or counts
(if Input Type is Process) around the Setpoint which the Process Variable
must pass above or below the Setpoint, before the output changes state.
