8
Installation Instruction
6.
Take off hinge assembly with a screw driver; assemble lower hinge assembly to left side of the cabinet with a
screw driver. Fix the removed medium beam screw and screw cap to the right screw hole position.
7.
Assemble the door of freezer chamber on the lower hinge.
8.
Assemble middle hinge assembly to left side of the cabinet.
9.
Assemble the door of refrigerator.
10.
Put on knuckle guard.
Levelling the unit
Levelling the unit by adjusting the two levelling feet at the front of the unit.
If the unit is not level, the door and magnetic seal alignments will not be covered properly.
Make sure that the foot touches the ground before use.
Look down from the top, clockwise and counter-clockwise loosening, tightening.
Door Handle Installation (OBMF323B)
1. Take out the screw caps from the door handle holes.
2. Put the handles into the screw holes and then hit
them to fix.