13
Set the time by touching the slider control. (e.g. 5)
Touch timer control again, the “1” will flash. To
set a time less than 10 minutes you will need to
set the right number first and then the left
number to “0”
set the time by touching the slider control (e.g.9), now
the timer you set is 95 minutes.
When the time is set, it will begin to count down
immediately. The display will show the remaining
time
When cooking timer expires, the corresponding
cooking zone will be switched off automatically.
Note:
a)
The red dot next to power level indicator will illuminate indicating that zone is selected.
b) You want to change the time after the timer is set, you have to start from step 1.
3.3.6 Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the ceramic hob. When an excessive
temperature is monitored, the ceramic hob will stop operation automatically.
3.3.7 Residual Heat Warning
When the hob has been operating for some time, there will be some residual heat. The letter “ H ”appears
to warn you to keep away from it.
3.3.8 Default working times
Another safety feature of the hob is automatic shutdown. This occurs whenever you forget to switch off a
cooking zone. The default shutdown times are shown in the table below:
Power level
1
2
3
4
5
6
7
8
9
Default working timer (hour)
8
8
8
4
4
4
2
2
2
4. Cooking Guidelines
Take care when frying as the oil and fat heat up very quickly. At extremely high temperatures oil
and fat will ignite spontaneously and this presents a serious fire risk.
Summary of Contents for OC90TZ
Page 2: ......
