3
INSTALLATION
Installation of the Hob
The appliance is supplied with an installation kit including adhesive sealing material, fixing brackets and screws.
•
Cut the aperture dimensions as indicated in the figure. Locate the aperture on the worktop so that, after the
hob is installed, the following requirements are followed.
B (mm)
590
min. A (mm)
50
T (mm)
520
min. C (mm)
50
H (mm)
41-47.5
min. E (mm)
500
C1 (mm)
560
min. F (mm)
10
C2 (mm)
490
G (mm)
20
D (mm)
50
I (mm)
25
J (mm)
5
•
Apply the supplied one-sided self- adhesive sealing tape all the
way around the lower edge of the cooktop. Do not stretch the
tape.
•
Screw the 4 worktop mounting brackets on to the side walls of
the appliance.
•
Insert the appliance into the aperture.
Summary of Contents for OCC64TZTGG
Page 1: ...INSTRUCTION MANUAL FOR OMEGA COOKTOP OCC64TZTGG...
Page 2: ......
