14
OFOIC909B
User Manual
Using the FlexZone Function
The FlexZones within the cooktop are modular, and can be
used either as a single larger zone, or two smaller zones
independently, according to your needs.
Examples of how to use the FlexZone:
Activating the combined FlexZone:
1. To activate the FlexZone as a larger, combined zone,
simply press the FlexZone function button .
2. The power settings will work the same as the other zones.
3. If cookware is moved from one end of the FlexZone to
another, the cooktop will automatically detect where the
cookware has been moved to, and maintain the same level
of power for the new placement.
4. To add another pot to the FlexZone, press the FlexZone
button again in order for the zone to detect the new piece
of cookware.
Operating the FlexZone as two independent zones:
To operate the modular FlexZone as two independent zones,
simply press either of the two halves of the FlexZone button.
The half of the button will activate the bottom zone, while
the half will activate the top zone.
Operating Your Cooktop
(Continued)
Using the Boost Function
While a cooking zone is active, touch the button for that zone
followed by the Boost button. The zone indicator will display
‘
b
’ and the heat will be set at maximum power.
Touching the boost control
B
, followed by the cooking zone
will revert the zone to its previous setting. Alternatively,
touching the Temp/Timer slider control will also revert the
zone to its previous setting.
The Boost function can be applied to all cooking zones, note
however that after 5 minutes of the Boost function being
activated, the zone(s) will revert to their previous settings.
If the Boost function is applied to a particular zone, adjacent
zones will be limited in their power unless also boosted.
If the initial setting prior to using the Boost function is 0,
the zone will eventually revert to level 15 rather than 0.
Using the AutoTemp Function
The AutoTemp function is a handy set of built-in automatic
temperatures that can help simplify the cooking process.
The settings include
Melt
for items like butter or chocolate;
Keep Warm
for dishes needing to remain hot if they are going
to be eaten at a later time; or the
Fry
setting which is perfect
for cooking vegetables, meat and eggs.
To activate the AutoTemp function:
1. First touch the button for the particular zone you would
like to use.
2. Next, touch the AutoTemp button . The display will then
show
—
, indicating that the AutoTemp level is set to the
‘Keep Warm’ heat.
3. Touching the AutoTemp button again, the display will then
show
, indicating that the AutoTemp level has been set
to ‘Melt’ heat.
4. Touching the AutoTemp button a third time, the display
will show
, indicating that the AutoTemp level has been
set to ‘Fry’.
5. To cancel the AutoTemp function, simply tap the button
for the zone you have selected, or alternatively touch the
Temp/Time slide control to revert to the previous setting.
Note:
This function can be used on multiple cooking zones
simultaneously. Be sure not to use a lid, as this could affect
the cooking process. Additionally, cast-Iron cookware is also
not recommended.
> Ø 200mm
Combined ↓
S
epar
at
e z
ones ↓