background image

8

OM-CP-ULTRASHOCK-A  & OM-CP-SHOCK300 

Storage and Data Transfer

The OM-CP-ULTRASHOCK-A and OM-CP-SHOCK300 
contain 8 Megabytes of storage space. This space 
provides for over 1,397,418 data points (OM-CP-
SHOCK300) and 598,893 data points (OM-CP-
ULTRASHOCK-A) for each channel, with all channels 
active.

If fewer channels are used, the active channels recover 
and utilize the unused storage space.

For instance, if only temperature were being logged, 
there would be adequate storage space for around 
4,000,000 data points.

The following table present several examples of storage capacity, measured in days, for various applications of  
the product.

1. In many cases, the storage space exceeds the battery capacity. In such cases, external power would need to 

be provided to the OM-CP-ULTRASHOCK-A and OM-CP-SHOCK300.

2. When logging at a sampling rate (not time) of 128Hz, for example, only 2.84 hours of storage is available 

without using triggered operation. If trigger is enabled, all storage space is available and is only used for 
the duration of the triggered shock events, plus a post-event buffer which is user programmable.

Product Maintenance

Battery Charging and Care

The OM-CP-ULTRASHOCK-A and OM-CP-SHOCK300 battery do not require any periodic maintenance. It 
should be charged as needed. If the unit will not be used for a while, leaving the battery in a 50% state of 
charge is considered beneficial to battery longevity. Using the Omega provided charger is recommended to 
maintain charging time.

The battery is a Lithium Ion two cell pack. Please note the safe handling and storage recommendations in the 
specifications section.

Inspection

 

The OM-CP-ULTRASHOCK-A and OM-CP-SHOCK300 may be inspected visually for any signs of damage, 
especially to the gray gasket or to the USB jack. If damage is found, visit www.omega.com to return the unit 
to Omega for repair.

Recalibration

 

Recalibration is recommended annually. To send devices back for calibration, visit www.omega.com.

SETUP CONDITIONS

COMMENT

DAYS OF 
LOGGING (1)

All channels,  
30s logging

Peak or 
Instantaneous

204

Temperature,  
humidity, 30s logging

683

3-axis shock, 128Hz,
instantaneous

No Trigger

2.84 hours

3-axis shock, 128Hz,
instantaneous

With Trigger

Many (2)

Summary of Contents for OM-CP-ULTRASHOCK-A












Reviews: