8
Right-click the Map View background and two options will be available:
Load Wallpaper
and
Reset Wallpaper
, which resets to the default Omega wallpaper.
3.6.
Configuring the Logger
Once the software has detected the OM-DAQLINK logger, you must configure the unit in order
to start acquiring data.
1. Right-click on the Logger icon. Select
Setup
from the context menu.
2. The Setup window will be launched.
Figure 3:
OM-DAQLINK
Logger Setup window
This dialog provides non-editable information such as the serial number, battery level, and
firmware version of the current unit.
On the
Device Setup
and
Alarm Setup
tabs, the user is able to configure the following
parameters:
Unit's comment
Sampling rate
Memory State
Averaging points
Temperature units °C/°F (on the logger LCD)
Anti-tamper mode
Active sensors
Custom sensors' names
Alarm levels
Alarm duration
