26
1.
Insert the DataSuite software CD into your computer’s CD drive. The DataSuite Installation
Wizard automatically starts running.
2. The Wizard first downloads and installs
Microsoft .NET Framework 2.0,
if not already
detected on the computer. The DataSuite software requires this platform in order to run.
Follow the installation instructions to install the .NET Framework on your PC. This step can
take up to two minutes to complete. Click
Finish
once installation is complete.
Note:
If .NET Framework is already installed on your computer this step is skipped.
3. The main DataSuite Installation Wizard now resumes. Follow the installation instructions to
install DataSuite on your computer.
4. Following DataSuite software installation is the Silicon Laboratories USB driver installation.
The driver is necessary for the computer to detect the OM-DAQLINK hardware.
5. Follow the on-screen instructions to continue the installation process. The default installation
location is
C:\SiLabs
.
Figure 14:
Installing
Silicon Labs USB driver
– Step 1
6. During the driver installation, the following window will pop up. Make sure to select the
checkbox to launch the driver installer, and click
Finish
.
Figure 15:
Installing
Silicon Labs USB driver
– Step 2
7. In the subsequent window, click
Install
to install the driver.
Figure 16:
Installing
Silicon Labs USB driver
– Step 3