90
6.2.4.
Cancelling Firmware Update
To cancel a firmware update, right-
click the unit’s icon in the Map View and select the
Cancel
Firmware Update
option.
If a data logger was in Run mode prior to the firmware update, when cancelling it the logger will
resume operation in Stop mode.
6.2.5.
Interrupted Firmware Update
There are several ways an in-progress firmware update may be interrupted:
Unselecting the checkbox next to the unit name in the Firmware Update Center
Disconnecting the USB from the device during USB firmware update
Exiting the DataSuite software
In each case, when the unit is back online the firmware update will automatically resume (from
the beginning of the update).
If a data logger’s firmware update was interrupted, and it was in Run mode prior to the update,
the logger will continue to run even after the interruption.
