background image

START HERE

Windows ™ XP/ Vista/ 7

OM-EL-WiFi Configuration Software Installation

Getting Started

Installing Software

Sensor Settings

The sensor will arrive partly charged but ideally you should charge it for 24 hours before use for 
optimum performance. The sensor will automatically start recharging while connected to a PC or USB 
charger using the USB cable provided.

The battery icon has three states:

The sensor may already be displaying a reading but it will not be confi gured or connected to your WiFi 

network until you complete the product set-up.  

To  set  up  the  unit  use  our  free  EasyLog  WiFi  PC  software  available  to  download  from  the  ‘Software’ 

section at www.omega.com.  

Not Displayed

Battery OK

1

Solid

Battery Charging

3

Flashing

Battery Low - Recharge!

2

Note:

 These screens will vary depending on which sensor model purchased. 

Connect the OM-EL-WiFi Sensor to the PC’s USB port with the USB cable provided.

Double click on the EasyLog WiFi icon on your Windows™ desktop. This will load the wizard confi guration 
software. Follow the on-screen instructions to set up your sensor.

Click on the ‘Set-Up 

Sensor’ button

1

Set High & Low Alarms

4

Name your Sensor, Select 

Temperature Scale, Sample 

Rate & Transmission Rate

3

Position your Sensor where 

you wish to take readings

6

Click on your network 

and enter your password 

if required

2

Sensor Set-up is now 

complete

5

Reviews: