7-8 Specifications
988093
Note
: Specifications are subject to change without notice.
PDQ30 Type T Thermocouple
Typical Performance of 12 PDQ30 Units; 0°C
(Note 1)
-1.5
-1.0
-0.5
0.0
0.5
1.0
1.5
0
5
10
15
20
Channel
E
rro
r ( °
C
)
Note 1: Assumes 16384 oversampling applied, CMV = 0.0V, 60 minute warm-up, still environment, and 25°C ambient temperature.
Excludes thermocouple error. TC
IN
= 0.0 °C
Accessories and Cables
Termination Board (TB-100)
:
Termination board with screw terminals for access to DaqBoard/3000 Series I/O.
The terminal board connects to the DaqBoard’s 68-pin connector via a CA-G55, CA-56, or CA-56-6 cable.
Rack Mount Kit (Rack3)
:
Kit for mounting the TB-100 termination board to a rack.
DBK215 Termination Module
:
Includes 16 BNC connectors and internal screw-terminals. DBK215 connects to
the DaqBoard’s 68-pin connector via a CA-G55, CA-56, or CA-56-6 cable.
PDQ30 Analog Input Expansion Module
: Adds 48 SE [or 24 DE] channels to a DaqBoard/3000 Series board.
Characteristics of the expansion channels are identical to those of the onboard channels. PDQ30 connects to
the 3000 Series board via HDMI cable CA-266-3, or CA-266-6.
PDQ30 cannot be connected to a
DaqBoard/3006.
CA-G55
:
68-conductor ribbon expansion cable. Can be used to connect a DaqBoard/3000 Series board to a
TB-100 or DBK215. Cable length: 3 ft.
CA-G56
:
68-conductor shielded expansion cable. Can be used to connect a DaqBoard/3000 Series board to a
TB-100 or DBK215. Cable length: 3 ft.
CA-G56-6
: 68-conductor shielded expansion cable. Can be used to connect a DaqBoard/3000 Series board to a
TB-100 or DBK215. Cable length: 6 ft.
CA-266-3
:
HDMI cable. Can be used to connect a PDQ30 expansion module to a DaqBoard/3000 Series board.
Cable length: 3 ft.
PDQ30 cannot be connected to a DaqBoard/3006.
CA-266-6
:
HDMI cable. Can be used to connect a PDQ30 expansion module to a DaqBoard/3000 Series board.
Cable length: 6 ft.
PDQ30 cannot be connected to a DaqBoard/3006.
Summary of Contents for OMB-DAQBOARD-3000 Series
