background image

3

IMPORTANT NOTE – WARNING and SAFETY INSTRUCTIONS

This  appliance  complies  with  all  current  safety  legislation,  however  the  manufacture  wishs  to  emphasise  that
compliance does not remove the fact that the appliance surfaces will become hot during use and retain heat after
operation.

We advise that the appliance is not intended for use by young children and infirm persons without supervision.
Young children should be supervised to ensure they do not play with the appliance.
If it is necessary for younger family members to be in the kitchen, please ensure that they are kept under close
supervision at all times.
We also advise that great care is taken during use and cleaning operations.

Do not place heavy objects on or lean on the oven door when open as this can cause damage to the hinging.

Do not leave heated oil or fat unattended as there is a risk of fire.

Do not place pans or baking trays on the bottom of oven cavities or line with Aluminium Foil.

Do not allow electrical fittings or cables to be in contact with hot areas of the appliance.

Do not use the appliance for space heating or to dry clothes.

Do not install the appliance next to curtains or soft furnishings.

Do not attempt to lift or move cooking appliances by pulling on any door or handle as this can cause damage.

Do not use a steam cleaner to clean the oven.

NOTE: This appliance must be correctly installed by a suitably qualified person, strictly in accordance

with the manufacturer’s instructions.

For electrical installations, NICEIC registration is recommended.

The manufacture & it’s agent declines any responsibility for injury or damage to persons or property as a

result of improper use or installation of this appliance.

Heat, steam and moisture will be created during use, take care to avoid injury and ensure that the room is

adequately  ventilated.  If  prolonged  use  occurs,  additional  ventilation  may  be  required  –  please  consult

your Qualified Installer if you are in any doubt about the amount required.

WARNING!!!

accessible parts will become hot when in use. To avoid burns and scalds children should be kept away.

Care should be taken to avoid touching heating elements inside the oven.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly

qualified person in order to avoid a hazard.

WARNING:  Ensure the appliance is switched off before replacing the lamp to avoid the possibility

                        of electric shock. 

Summary of Contents for OO674XA

















Reviews: