Omega ORCG60MB, Instruction Manual

11 

Maintenance and Cleaning 

Safety Precaution 

•

Before cleaning your rangehood or performing any maintenance, please ensure that the range hood 
is turned off at the power point.  

•

Do not use abrasive cleaners to clean the range hood. The use of warm soapy water and a cloth are 
recommended. 

•

Ensure that the range hood is cleaned regularly, as a build-up of grease and fat may occur 
otherwise. 

•

The filters on the range hood must be cleaned regularly to maintain efficiency, and prevent grease 
build up. The filter mesh is made of metal. It is recommended that this is undertaken every 4 

–

 6 

weeks, depending on frequency of use. The filters can be cleaned with warm soapy water or a cloth. 

•

The stainless steel must be cleaned regularly (e.g., Weekly) to ensure a long-life expectancy. Dry 
with a clean, soft cloth. A specialized stainless steel cleaning fluid may be used. 

•

The inlay control panel can be cleaned using warm soapy water. Ensure the cloth is clean and well 
wrung before cleaning. Use a dry soft cloth to remove any excess moisture left after cleaning. 

•

Cleaning of the range hood must be performed as described above. Otherwise, there is a possibility 
of a fire hazard due to grease and fat build up. 

INSTALLING GREASE MESH FILTERS 

•

To install filters for the following four steps: 

•

Angle the filter into the slots at the back of the hood. 

•

Push the button on the handle of the filter. 

•

Release the handle once the filter fits into a resting position. 

•

Repeat to install all filters.