12
Maintenance and Cleaning
BULB REPLACEMENT
WARNING: The bulb must be replaced by the manufacturer, its service agent or similarly qualified
persons
.
•
Remove the grease filter.
•
Use a screwdriver to remove the 4pcs screws on the large glass and carefully remove the glass.
•
Then slightly pull the light connecting wire out and dismantle the terminal of the light connecting
wire. Replace the lamp.
•
Apply the reverse procedure to install the light back.
ILCOS D code for this lamp is: DSR-1.5/65-S-64
–
LED modules
–
round lamp
–
Max wattage: 2×1.5 W
–
Voltage: DC 12V
Dimensions:
NOTE.
•
Always switch off the electricity supply before carrying out any operations on the appliance. When
handling bulb, make sure it has completely cooled down before any direct contact with hands.
•
When handling bulbs hold with a cloth or gloves to ensure perspiration does not come in contact
with the bulb as this can reduce the life of the bulb.
•
Before changing the lights, make sure that the appliance is turned off and unplugged.
•
Protect against danger when changing lights, such as wearing gloves.
Summary of Contents for ORCG60MB
Page 1: ...Instruction Manual OMEGA CURVED GLASS RANGEHOOD ORCG60MB ORCG90MB...
Page 14: ...14...
Page 15: ...1...