3.4 TRH Central Measurement and Recording Program
To launch the TRH Central program on your PC begin by accessing the “All
Programs” list under your “Start Menu” Next, scroll through the list of program
folders to find the “Omega” folder. Inside the “Omega” folder click on the “TRH
Central” program link. This will start the software running.
3.4.1 Main Tab Menu
Channels Tab
The “Channels” tab shown below is the default screen that is displayed when
you run the program. This screen provides a real-time digital reading of relative
humidity (when used with model RH-USB) or pressure in PSI (when used with
model PX409-USB) or temperature (when used with model TJ-USB, UTC-USB,
or IR-USB) in either °F or °C. You can change from °F to °C by clicking with your
pointer the on screen °F or °C buttons.
Figure 3-10. Channel Tab Screen
This is a partial view below of the TRH Central Program in operation. This
shows one RH-USB Probe on Channel #1 one TJ-USB Probe on Channel #2, and
one PX409-USB Probe on channel #3, being used at the same time.
Figure 3-11. TRH Central Program Screen
Software
3
3-6
