INST.No.INE-418-1P1CE
-15-
[Programming range of clock]
Programming
range
Default
Month
*
1
to
12
1
Day
*
01
to
31 01
Hour 0
to
23 0
Minute 00
to
59 00
Year 2001
to
2099
2001
* Leap years are supported.
5. Measurement preparation
Accurate clock programming
For the accurate clock programming including second, take the following procedures.
1. Load the batteries at 0 second by referring to the radio time signal or an accurate watch.
2. Adjust the clock with the procedures from Para. 5.2.1 to Para. 5.2.7.
The counting of second starts at the moment the battery is loaded.
The clock will be initialized when the batteries are replaced. Reprogram the clock.
If the clock is reprogrammed, all time-related-parameters will be initialized. Reprogram the parameters.
For the programming by
∧
key, when the value reaches to the maximum value of the programming range,
it will not return to the default value even if
∧
key is pressed continuously.
Use
∨
key to decrease the value.
The time is based on 24-hour clock system. Program
14-hour for PM2 and 22-hour for PM10.
If
DISP
key is pressed before the retaining of year, the
programmed data before it will not be stored.
Caution
Reference
Caution
Reference
Summary of Contents for RH32 Series
Page 1: ......
