Omega TWN30 SERIES, User Manual

SAFETY FIRST

3

When using electrical appliances, basic safety precautions should always be followed 
including the following. 

1.    READ ALL INSTRUCTIONS BEFORE USING.
2.      To protect against electrical shock, do not immerse cord, plug, or main body (motor) 

in water or other liquid.

3.    Close supervision is necessary when any appliance is used by or near children.
4.   Unplug from outlet before assembling, before taking off parts, before cleaning and 

when not in use.

5.  Avoid contact with moving parts.
6.   Do not operate any appliance with a damaged cord or plug or after the appliance 

malfunctions or has been damaged in any manner. Return appliance to the 
manufacturer (see warranty) for examination, repair, or electrical or mechanical 
adjustment.

7.   The use of attachments not recommended or sold by manufacturer may cause fire, 

electric shock or injury. 

8.     Do not let cord hang over edge of table or counter or touch heated surfaces.
9.    Always make sure juicer locking clip is locked when juicer is in operation.
10.   To disconnect, press/switch OFF then remove plug from wall outlet. Make sure the 

motor stops completely before disassembling.

11.   Do not put your fingers or other objects into the juicer while it is in operation. If food 

becomes lodges in opening, use food plunger or another piece of fruit or vegetable 
to push down the lodged food. When this method is not possible, turn off the 
machine, remove the plug from wall outlet and disassemble juicer to remove the 
remaining food.

12.  Do not use outdoors.
13.   Do not place on or near a hot gas or electric burner or in a heated oven.
14.  Do not use appliance for anything other than its intended use.

15.   Keep the appliance clean. Refer to the Care & Cleaning instructions in this manual.

Warning: This appliance has a polarized plug (one blade is wider than the other).  
To reduce the risk of electrical shock, this plug will fit in a polarized outlet only one way. 
If plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a 
qualified electrician. DO NOT attempt to modify the plug in any way. 

SAVE THESE INSTRUCTIONS