OIL-HYDRAULIC PRESSES WITH TWO UPRIGHTS
OPERATION AND MAINTENANCE MANUAL
12
4.
TRANSPORTATION CONDITIONS
The “OPI-N” oil-hydraulic presses with two uprights are already completely assembled on delivery and for the
handling of these, special lifting attachments have been fitted to the upper part of the machine.
The tables below contain the weights of the parts of machine; the user should consult these tables for the type
of lifting means to use and the correct lifting capacity.
NOTE:
The total weight indicated for each model has been calculated with empty oil tank.
The following tables are filled in at the time of machine delivery after the weighing of each
individual part.
Type
OPI 315
Kg
Total weight
29000
Slide weight
3000
Table weight
3100
DANGER
Lifting equipment in line with current safety regulations should be used, especially chains
and cables which should have the "CE" mark of approval.
4.1
EQUIPMENT NECESSARY FOR MONOLITHIC PRESS HANDLING
(to be supplied by the customer):
?
4 supporting shims (only if the blank holder unit is protruding) with the following characteristics:
height ............mm (depending on the extent to which the blank holder protrudes from under the press),
base of (300x300)mm is in iron,
or base of (500x500)mm in hard wood.
?
4 chains with lifting hooks with a capacity suitable for handling the load.
?
2 iron eyebolts suitable for handling the load or with the shape and dimensions given in fig.1.
fig. 1
?
2 bolts with a length of 180mm and a diameter of 40mm to fasten the eyebolts to the press feet.
300
60
100
=
=
120
50
60
600
