OIL-HYDRAULIC PRESSES WITH TWO UPRIGHTS
OPERATION AND MAINTENANCE MANUAL
34
7.3
TANK AIR FILTER
Every 500 working hours [or less in a dusty environment]
clean or, if necessary, replace the cartridge of the air
filter on top of the tank cover.
The filter used is made by M.P. and is the following
type:
SA 185 G1 L10 A
(Omera Code 76807017)
The cartridge used is made by M.P. and is the following
type:
A 10 L10
(Omera Code 76807038)
Description:
-1) Fitting
-2) Filtering element
-3) Casing
7.4
OIL FILLER CAP
Type: MP mod.
TA 80 B10 B001 P01
(Omera Code 75702104)
Description:
-1) Strainer
-2) Gasket
-3) Gasket
-4) M5x12 screw
7.5
OIL CHANGE
Every 2000 working hours the oil in the circuit should be
changed.
The existing oil should be removed through the tap provided and then the new oil added which should be the
type indicated in the "RECOMMENDED FLUIDS" paragraph.
Carry out the oil change with the cushion at B.D.C. and the slide at T.D.C. following the same procedure given
in the "FILLING OF THE OIL TANK" paragraph.
The machine test certificate, shown at the beginning of this manual, indicates the quantity of oil required for the
correct functioning of the press.
