AccuTrac / RhinoTrac Owner’s Manual
Page 4
WARNING
3. PERSONAL SAFETY
a) Stay alert, watch what you are doing, and use common sense when operating power tools. Do not use power tools
while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating
power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Other protective equipment such as a nonskid safety
shoes, hard hat, hearing protection, and/or dust mask used for appropriate conditions can reduce personal injuries.
c) Prevent unintentional starting. Ensure that the switch is in the “OFF” position before connecting to a power source,
picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have
the switch “ON” can invite accidents.
d) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in
unexpected situations.
e) Dress properly. Do not wear loose clothing or jewelry. To avoid potential personal injury, keep hair, clothing, and gloves
away from moving parts.
WARNING
4. POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
b) Disconnect the plug from the power source before inspecting, cleaning or storing power tools. Such preventive safety
measures reduce the risk of activating the tool accidentally.
c) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
d) Maintain power tools. Check for cracked or broken parts or any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained
power tools. Contact OMG Roofing at 800.633.3800 or 413.789.0252 for details.
e) Use the power tool, in accordance with these instructions, taking into account the working conditions and the work to
be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
WARNING
5. ACCUTRAC EZ & RHINOTRAC EZ
a) This tool is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction concerning use of the tool by a person
responsible for their safety.
b) A separate manual about the use, operation, and limitations of the screw-gun component of the Accu-Tool has been
provided by the screw gun manufacturer. Read all instructions and safety warnings in both manuals. Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious injury.
CAUTION
• In addition to the safety instructions in this manual, OMG Roofing Products recommends that all
roof top workers follow the safety guidelines outlined in the OSHA booklet called “Protecting Roofing
Workers” available at
www.osha.gov/Publications/OSHA3755.pdf
and or EU-OSHA “Directive
92/57/EEC - Temporary or mobile construction sites,” as applicable.
