MF 64
Author: Donato Gavino Murru donato.gavino.murru@omgitaly.com
Pag.
70
a
179
The water dispenser is managed as follows:
8. Cooling water
Inlet
connection
9. Cooling water
Outlet
connection
10. Thermoregulation water
Inlet
connection
11. Thermoregulation Water
Outlet
Connection
12. Delivery of cooling water to the
chain guides
13. Return of cooling water from the
chain guides
14. Cooling water delivery to the
mold
15. Return of cooling water from the
mold
16. Cooling water delivery to the
die
(cut)
17. Return of cooling water from the
die
(cut)
Water scheme
See attached scheme
Cooling System
Thermoforming equipment is generating a lot of heat. For this reason, it is mandatory to use a
cooling system to regularize temperature in different sections of the machine.
4
5
6
2
3
1
10
9
8
7
7
