PACECART 3 WITH BAG-IN-BOX TECHNOLOGY
Thank you for choosing OlyBond500
®
Adhesive, and for investing in the PaceCart 3 for fast, reliable appli-
cation. PaceCart 3 is a portable, easy-to-use system for attaching approved insulation in virtually any flat
or low-slope roofing application.
Features & Benefits:
• Lowest installed cost method of attaching insulation
• Fastest, low-pressure method available, secure up to
60 squares (557m
2
) of insulation per
hour
• Lightweight, portable, clean and easy-to-use
• No noxious odors or noise during installation
• Two component reaction occurs in the disposable mix tips so the gun and hoses remain clean
and free-flowing for maximum efficiency
OlyBond500 is so versatile it can be used to adhere almost any type of insulation to a wide variety of
substrates. (See page 4 for details.) Regardless of roof size, installation is easy thanks to the patented
PaceCart 3 dispensing system. Highly portable, the PaceCart 3 does not require heated hoses or high-
pressure spray equipment. Although it offers a safe, tested method of application, be sure that every
member of your crew has a thorough understanding of the system before use. Read, understand and
follow all instructions. To schedule rooftop training, call
800.633.3800
or
413.789.0252.
Use only approved OlyBond500 adhesives with this machine.
Failure to do so may cause extensive
damage and will void all warranties.
PATENT NOTICE:
The OMG PaceCart
®
3 dispensing cart and the Bag-in-Box OlyBond500
®
Part 1/Part 2
adhesive system, including the adhesive dispensing method, are covered by one or more of U.S. Patent
Nos. 8,167,170; 8,342,372; 8,474,658 and 9,327,308; and Canadian Patent Nos. 2,591,502 and 2,821,452.
Congratulations on your new purchase.
We look forward to your feedback. Please send us your
comments and suggestions at any time.
PaceCart 3 Product Development Team
OMG, Roofing Products | info@omginc.com | 800.633.3800 | 413.789.0252 | www.omgroofing.com
OlyBond500
®
, PaceCart
®
3 and OMG PCPreserver
™
are trademarks of OMG, Inc., a leading provider of
innovative fastening solutions and products for the construction industry. © Copyright 2020 OMG, Inc.
All rights reserved.
Contact OMG or your roofing membrane manufacturer for the most current list of approvals.
Subject to the conditions of
approvals as insulation adhesive
for use in Class 1 roof construction
as described in the current edition
of the FMRC Approval Guide.
For roofing systems as to external
fire exposure see UL directory of
products certified for Canada and
UL roofing materials and systems
directory.
57ZM
TABLE OF CONTENTS
3 Safety Instructions
3 PaceCart 3 System
Accessories
Provided
Tools
Required
4 System Components
4 Material Compatibility Specifications
Approved Substrates
Approved Insulation Types
OMG Consultation Services
5 Operating Instructions
Step 1: Tighten Fittings
Step 2: Install OlyBond500 Boxes
Step 3: Check Power
Step 4: Purge the Gun
Step 5: Grease and Attach Mix Tip
Step 6: Apply Adhesive to Surface
Step 7: Shut-Down Procedures
Step 8: Start-Up after Shut-Down
6 Schematic & Parts List
7 Troubleshooting
8 Important Information
8 Warranty
PaceCart 3 Owner’s Manual
Page 2