background image

Thank you for purchasing a PaceCart 3, the 

most efficient method for installing OlyBond500 

Insulation Adhesives. When properly used, your 

new PaceCart 3 can dispense enough OlyBond500 

to apply up to 60 squares (557m

2

) of roofing insula-

tion per hour.
OlyBond500 is a two-part, slow rise, polyurethane 

adhesive used to adhere insulation to insulation 

and to low-slope roof substrates in both new and 

re-roof applications.

APPLICATION

Part 1 is to be mixed with Part 2 at a 1:1 ratio by 

volume and applied using the OMG PaceCart 3 

dispenser.

HANDLING & STORAGE

OlyBond500 should be stored in a cool, dry loca-

tion at temperatures between 55°F and 85°F (13°C 

and 29°C). Protect from freezing at all times. Keep 

containers closed. Contamination by moisture or 

basic compounds can cause dangerous build-up in a 

closed container. The minimum product temperature 

before application should be 72°F (22°C). The mini-

mum ambient and surface temperatures should be 

40°F (4°C) and rising.

For long term PaceCart storage, use OMG 

PCPreserver

.

WEAR PROTECTIVE GEAR

Do not get into eyes, on skin or on clothing. Wash 

thoroughly

 

after handling.

• 

Splash goggles  •  Gloves

DISPOSAL

Do not discharge into lakes, streams, ponds or 

public waters. Spilled material, unused contents 

and empty containers should be neutralized and 

disposed of in accordance with local, state and 

federal regulations.

DO NOT LEAVE EXPOSED OR UNPROTECTED. 

Polyurethane foam or isocyanurate foam products 

may present a serious fire hazard if exposed or 

unprotected. Each person, firm or corporation en-

gaged in the manufacture, production, application, 

installation or use of any of these materials should 

carefully determine whether there is a potential 

fire hazard associated with such product in a spe-

cific usage and take all appropriate precautionary 

and safety measures as outlined in local, state and 

federal regulations. When not in use, keep stored 

containers closed.

WARNING

OlyBond500 must be applied with a com-

patible PaceCart dispenser 

and stored at 

room temperature prior to use. Keep containers 

closed and store in a well-ventilated, cool, 

dry location in temperatures between 55° and 

85°F (13°C and 29°C). Protect from freezing. 

Use only with ventilation, which will keep the 

vapor concentration below the TLV ceiling limit 

of 0.02 PPM. Failure to follow all instructions 

could result in 

property damage or serious 

personal injury. 

FIRST AID DIRECTIONS 

Contact with this product can cause seri-

ous harm.

 

Seek assistance as  follows. 

Eyes:

 Immediately flush eyes with running 

water for at least 15 minutes. Call a physician 

immediately. 

Skin:

 Wash affected area with 

soap and water. 

Ingestion: 

If swallowed, give 

large amounts of water to dilute. If  

vomiting occurs, give more water.  

Call a physician immediately.

THE PACECART 3 

SYSTEM

PROVIDED WITH PACECART 3

White Lithium  

Spray

Connectors  

(3 black and  

3 gray included)

Mix Tips

  

(20 included)

Cleaning  

Solvent

ADDITIONAL TOOLS REQUIRED

Stable Power  

110-125 volts,  

60 Hz AC

Power Cord  

75 feet (23m) max. 

12 gauge (2.8mm) min.

Adjustable  

Wrench

Large Flathead 

Screwdriver

Empty  

Bucket

READ & SAVE ALL INSTRUCTIONS

PaceCart 3 Owner’s Manual  

Page 3

Summary of Contents for PaceCart 3









Reviews: