Cod. 710.0167.01.00 Rev02
– 10.2019
© Copyright 2019 OMI Srl - All rights reserved
1
– 12
- EN -
INTRODUCTION
This manual is an integral part of the dryer you bought, and must remain with the machine even if this will be resold.
It is highly recommended that the qualified*personnel for installation maintenance and/or control will fully comply with the contents
of this manual and the prevention and safety rules in force in the country where the system will be used. In this way, not only the usage
of the machine will be rational, but also the service will result cost effective.
In case your dryer will present any kind of problem, please contact your local authorizedOMI distributor.
Please note that, when necessary, the use of original spare parts will ensure efficiency and long duration to your dryer.
Due to the continuous technological evolution,OMI reserves the right to modify the specifications contained in this manual without
giving previous notice.
SYMBOLS AND LABELS USED IN THE MANUAL AND ON THE DRYER
o
o
o
Punto ingresso aria.
o
o
o
Punto uscita aria.
Read the Operators manual before attempt to start
up the machine and to perform any service
operation on the dryer.
Pay particular attention to components or systems
under pressure.
Pay particular attention to the indications preceded
by these symbols.
Pay particular attention to hot surfaces.
Installation, maintenance, and/or control operations
preceded by these symbols must be performed
exclusively by qualified personnel*.
Pay particular attention to the risk of electric shock.
Condensate drain point.
Rotation direction of the fan.
Pay particular attention to the risk of moving parts
Explosion risk.
Lifting point.
Don’t lift from this point.
Attention:
Before
performing
any
maintenance
operation
on
this
machine, do not forget to disconnect
the electric supply, to completely
discharge air pressure, and to refer to
the Operators manual.
* Qualified personnel must be trained and certified in accordance with local laws and regulations.
WARRANTY
The Company warrants that the equipment manufactured by it and delivered hereunder will be free of defects in material and
workmanship for a period of twelve months from the date of placing the Equipment in operation or eighteen months from the date of
shipment from the factory, whichever shall first occur. The Purchaser shall be obligated to promptly report any failure to conform to this
warranty, in writing to the Company in said period, whereupon the Company shall, at its option, correct such nonconformity, by suitable
repair to such equipment or, furnish a replacement part F.O.B. point of shipment, provided the Purchaser has stored, installed,
maintained and operated such Equipment in accordance with good industry practices and has complied with specific recommendations
of the Company. Accessories or equipment furnished by the Company, but manufactured by others, shall carry whatever warranty the
manufacturers have conveyed to the Company and which can be passed on to the Purchaser. The Company shall not be liable for any
repairs, replacements, or adjustments to the Equipment or any costs of labor performed by the Purchaser or others without Company's
prior written approval.
