7.3.4 NTP configuration page
The NTP server on
OTMC 100
requires an accurate time source before any NTP client can
synchronize to it. Two time sources are possible: GPS or external NTP servers. If at least one time
source becomes available, it will take a few seconds until the NTP server synchronizes to the time
source.
Select the corresponding pane to specify your NTP configuration settings. Click the
Save
button to
save and apply your NTP configuration specified in the individual tabs to
OTMC 100
.
7.3.4.1
External servers pane
Use this pane to specify external NTP servers, for example to improve safety if the GPS signal fails. If
you are exclusively using GPS as an NTP time source, it is not necessary to specify an NTP server on
this tab.
The OTMC 100 web interface
OMICRON
69