If you have any problems assembling your
Eglu Cube
call us on
0845 450 20 56
or email
info@omlet.co.uk
www.omlet.co.uk
Step A - Connect the Run Frame together
Lay the Frame sections on the ground infront of the Eglu Cube. The
curved section of the Frame simply slides onto the two side pieces.
Line up the frame with the run making sure that the flat sides of the
tube ends are against the inside of the run.
Also ensure that the hole in the tube is half way along the first
rectangle in the mesh.
Firstly unclip the end of your fully assembled run.
Omlet Limited
Unit 4 Tuthill Park
Wardington
Oxon OX17 1RY
www.omlet.co.uk
info@omlet.co.uk
0845 450 20 56
What you have received:
Eglu Cube Run Extension
Instructions
Run Panel Side
Large x2
Run Panel
Top x1
Run Frame
Middle x1
Run Frame
Leg x2
Fastener
Pack x1
