10
Installation
Replacement
: Allow the fireplace to cool before removing or replacing glass. Use caution when removing broken glass to prevent
injury. Do not apply any force on the glass as this may cause breakage. To remove a glass, first remove the fire bowl. Then lift the
first sliding glass up so it can get out of the base rail. Now push gently the base of the glass in order to move it in direction of the
center of the fireplace. The top of the glass will then get out of the hood rail ; Proceed the same way for the stationary glass pannels.
F. GLASS INSTALLATION / REPLACEMENT
Installation
: Use caution when manipulating glass to
prevent injury. Do not apply any force on the glass as this
may cause breakage. Please check the hood level to be
490 mm (19-5/16’’) from stationary box support level. The
meijifocus receives 5 glass panels : 3 stationary and 2
sliding on track. To fit a glass panel, first remove the fire
bowl for easier access. Then present the glass panel botom
first, inclined as illustrated on the hereunder image.
The top left and right corners must be presented and
adjusted to penetrate into the hood rail. External rail is for
sliding panels, internal rail is for the stationary panels. Slide
up the panel and rotate it gently so it gets its position vertical
again. Then just slide down the panel in order to secure it in
the stationary box track.
Each stationary glass panel should be gently secured to the
hood internal ring using the supplied offset retention clips
and knurled bolts.
x3 fixed glass
x2 mobile glass
G. GLASS ARRANGEMENT
