4 Sense Locate Position Demo Kit
To facilitate product evaluation, demonstrations and POC’s Omni-ID can
provide a demo kit that is optimised for rapid deployment in simple
environment.
The Demo Kit contains a MultiTech Conduit LoRa gateway pre-configured
with onboard network server which will run node red to process tag’s
payload.
This removes the need to obtain and configure a network server for simple
single gateway environment. Node red is used to parse device payload into
individual elements and forwarded in JSON format to any end application
over HTTP.
Example:
Pay Load: 80590d030f7df3ffa11d41 JSON sent from gateway to end
application over HTTP:
“Mac_Address”:”37:37:33:38:5c:37:6f:0c”,”Tag_Type”:5,”Data_Length”:0,
“DBR”:0,”ABR”:0,”Temperature”:13,”Latitude”:51.206528,”Longitude”:-0.819953,
“Voltage”:2.9,”Motion_Alarm”:0,”Temperature_Alarm”:0,”Battery_Alarm”:0,
“Input1_Alarm”:0,”Output1_Alarm”:0,”No_GNSS_Lock”:1,”HW/FW”:”2 1”, “RSSI”:-
94,”Data”:0,”Battery_Status”:0,”Gateway_ MacAddress”:”00:08:00:4A:17:22”}
Alternatively, a network server can be used, and the parsing of the data can
be built into customer’s application directly, to do this the gateway can be
configured to act as a packet forwarders.
V21220SLP
22
