OMNITEXT-240 User Manual
P a g e
|
12
For every alarm, a description of up to 20 symbols can be set. Digital inputs in COUNTER mode only
can be set.
There are four types of alarms
–
Warning, Minor, Major and Critical.
When the alarm is activated 2 independent alert actions are possible
–
SMS and Post (HTTP post with
XML/JSON file). Each alarm notification method is activated by a checkbox.
In the time when the input is in an alarm state, the appropriate input will be coloured in red on the
Monitoring page.
7.2.4.2
Discrete alarms
To assign a digital input to this alarm, it must be pre-set in Discrete (OPEN/CLOSE) mode in the Setup
/ Input page.
The alarm state can be set for every alarm.
There are four types of alarms
–
Warning, Minor, Major and Critical. For every discrete alarm, a
description of up to 20 symbols can be set.
When the discrete alarm is activated, 2 independent alert actions are possible
–
SMS and Post (HTTP
post with XML/JSON file). Each alarm notification method is activated by a checkbox.
The “On Return” check box can be used in conjunction with the other check boxes to send the
notification when the alarm returns to normal.
7.2.5
System
The page for some general settings.
7.2.5.1
System status
There is information about the general status of the logger here.
The only possible setting here is
“Data
in
roaming”
checkbox. By default, it is disabled to avoid extra
charges for data transfer in roaming.
Some operator's SIM cards require you to activate
“Data
in
roaming”.
Otherwise, you will not be able
to use all GPRS services
–
emails, HTTP Post, NTP, etc.
