OMNI 4000/7000 Operations and Maintenance Guide
– Rev F
6-7
Front Panel Operations
5.
For some small volume type provers that
have been configured to measure the
Plenum Pressure
process variable, there
is also an option to edit the
Input Zero
Scale
and
Input Full Scale
values.
a. Use the arrow keys to select the
variable you wish to edit.
b. Press
OK
to access the field and
make changes.
c. Press
OK
or the
Accept
function key
to save your changes.
6.
When finished, press the
Back
key to
return to the
Prove Control
screen to
initiate a new prove sequence, or press it
again to return to the
Home
screen.
6.4
Front Panel Reports
While all of the flow computer’s reports can be accessed through OMNICONNECT, you can also
print reports from the front panel.
To access and print reports, follow these instructions:
1.
a. In the
Home
menu, use the arrow
navigation keys to go to and select
Reports
.
b. Press the
OK
key.
Alternatively, you can access the
Reports
screen by pressing the
Reports
function
key, whenever it appears, from any screen
in the flow computer.
