OMNI 4000/7000 Operations and Maintenance Guide
– Rev F
6-16
Front Panel Operations
6.
a. Press the
Back
key to return to the
main
Transducers
menu.
b. Use the navigation keys to select a
different Meter Run or Station to edit,
as needed.
7.
If the flow computer is configured through
OMNICONNECT to use
Auxiliary Inputs
,
you can also access and edit their process
variables through the
Transducers
screen.
6.6.5 Batch Operations
To access batch operations from the front panel, follow these instructions:
1.
a. In the
Home
menu, use the arrow
navigation keys to go to and select
Operate
.
b. Press the
OK
key.
2.
In the
Operate Functions
screen, select
Batch
.
Auxiliary Inputs
can be used to
bring in signals for variables such
as %BS&W and viscosity.
