OMNI 4000/7000 Operations and Maintenance Guide
– Rev F
7-14
Maintenance
7.2.5 System Resets
To access the flow computer’s system reset options, follow these instructions:
1.
In the Actions ribbon, click
Diagnostics
.
2.
Click
System Resets
in the
Diagnostics
tree to display the flow computer’s system
reset option screens to the right.
The
System Reset
tabs are detailed in the
following sections:
•
•
Reset Single Channel Calibration
•
Reset Multiple Channel Calibration
•
•
•
•
Reset Date and Time
T
he Reset Date and Time tab allows Operators the ability to manually set the flow computer’s
date and time, or to synchronize with
the PC’s current date and time by clicking the Get PC Date
and Time button (Figure 7-6).
Figure 7-6: Reset Date and Time Tab
