OMNI 4000/7000 Operations and Maintenance Guide
– Rev F
7-24
Maintenance
1.
a. In the
Home
menu, use the arrow
navigation keys to go to and select
Utilities
.
b. Press the
OK
key.
2.
With
System Date/Time
highlighted, press
OK
.
3.
a. Use the arrow keys to select the
variable you wish to edit.
b. Press
OK
to access the field and
make changes.
c. Press
OK
or the
Accept
function key
to save your changes.
4.
a. Continue to view or edit date and time
settings, as needed.
b. When finished, press the
Back
key to
return to the
Utilities
screen or the
Home
key to return to the
Home
screen.
7.3.2 Calibration
Input Calibration
The options to calibrate by variable name
(for example, ‘Temperature’), will not be
selectable under the six individual Meter Runs or the two Stations or the prover until
input channels have been assigned to them in OMNICONNECT.
To calibrate the input channels, follow these instructions:
