OMNI 4000/7000 Operations and Maintenance Guide
– Rev F
3-5
OMNICONNECT® Operations
3.4.2 Station Configurations
To create a Station or make changes to current settings, follow these instructions:
1.
In the Actions ribbon, click
Configure
.
2.
a. To make changes to an existing
Station, go to Step 4.
b. To create a Station, click on
General
Setup
in the
Configure
tree.
c. Click on the
Equipment List
tab.
d. Select either one or both Stations, as
needed.
3.
When finished configuring the Stations,
click
Apply
to save your changes. The
Stations you selected will now appear in
the
Configure
tree.
4.
To make changes to an existing Station,
expand that Station in the
Configure
tree.
You may see different items listed
in the tree, depending on your
selections in the
Equipment List
.
