OMNI 4000/7000 Operations and Maintenance Guide
– Rev F
3-17
OMNICONNECT® Operations
3.5.2 Prove Configuration
To access proving configuration settings, follow these instructions:
1.
In the Actions ribbon, click
Configure
.
2.
a. Expand the
Prover
function in the
Configure
tree.
b. Select
Configuration and Setup
to
display the
Prover
configuration
options in the screens on the right.
3.
a. Select the
Prover Type
as discussed
in Prove Types in Section 3.5.1.
b. Click
Apply
.
4.
a. Select the
Prover Characteristics
tab
(liquid applications only), and verify or
make changes to the settings.
b. Click
Apply
.
