OMNI 4000/7000 Operations and Maintenance Guide
– Rev F
3-35
OMNICONNECT® Operations
4.
a. Click on the
Batch Scheduling
tab to make any changes to those options. The
Disable Stack Shift on Auto Batch Ends
option is only available for
liquid applications.
b. Click
Apply
to save your changes.
c. For more information on batch scheduling and ending operations, go to Section 3.6.4
d. Ending a Batch.
e. For information on Batch Reports, go to Section 4.5.5 Batch, Daily and Prove
3.6.2 Adjust Batch Size
To adjust the batch size in liquid applications, follow these instructions:
1.
In the Actions ribbon, click
Operate
.
2.
a. Expand the
Control
tree, and expand
the
Batch
– Stack Shift
list.
b. Select a Meter Run or Station batch
to edit.
3.
a. To adjust the size of the batch in
progress or a currently idle batch, go
to Step 4.
b. To adjust the size of a batch in the
sequence other than the batch in
progress or one that is currently idle,
go to Step 5.
