SECTION 9 |
80
“STUDIO” ACCOUNT
AES67 {x} 1-8 (AES67 mode, Same audio on L&R)
When the “Profile” is switched to AES67, several options change. The 4 or 8 AoIP outputs (depending on ULA L/R
mode) can be set for any combination of AES67 and Livewire.
AES67 Profile Specific Options
MCast Addr
Enter the desired multicast address for this AoIP output. The preferred range is 239.0.0.0 to 239.255.255.255.
Ensure that you are using a unique multicast address on the network and not overlapping with any existing traffic.
Livewire, for example, uses 239.192.0.0 through 239.196.255.255 for streams and 239.192.255.x for control. Refer
to “Introduction to L” document at
http://www.telosalliance.com/lwintro
for details.
Port
Enter the desired port for the multicast traffic, or leave set to default.